Doorbird

The Cinegration Doobird driver relies on several components to operate properly with Control4. Each of these steps needs to be setup in order to get video calls to the touchscreens. Doorbird App Setup (Part 1) - Download the Doorbird app to your smart phone using your mobile device app store. - Launch the Doorbird app once installed to your mobile device. - Select the gear icon at the bottom of the app. - Select "Administration" - Login to the Doorbird app using the admin user...

A door lock can be controlled from the Doorbird app as well as touchscreen custom button on a Control4 touchscreen. DoorBird and Control4 give a dealer many ways to control a gate or Doorlock. There are two primary types of locks: Relay via Doorbird: This method, the dealer would connect the lock or gate trigger directly to the relay output of the DoorBird. The dealer would wire to the O1/O2 outputs to the Doorlock or gate trigger. This relay is a Normally Open relay. If the Doorlock requires ...

DKV doorbird models need to have a doorbell setup in the doorbird app before it will trigger a doorbell event in composer. The following guide explains how to setup the doorbell in the doorbird app. 1. Launch the Doorbird app on your mobile device. Once open select the gear icon in the bottom right of the app: 2. After selecting the gear icon select "Administration" under the further functionality sub-menu: 3. Enter the admin username and password of the Doorbird or scan the QR code that ...

If you'd like to display a snapshot image on a TV when the doorbell is pressed this can be accomplished in Composer via custom programming. Part 1: Get Snasphot URL stream from Doorbird Driver - Generate the snapshot URL in the driver actions menu - Go to the Lua tab to view the snapshot - Copy the snapshot URL for your custom programming Part 2: Create programming (see example below using the family room example) - Add an if statement (Room Power On) - Send a 'Control4'...